PWHT 35KW Air Cooled Digital Post Weld Heat Treatment Equipment Used Pre Heat Oil Pipe

DSP-35KW Air Cooled Digital Induction Heating Machine for Heating Shrink ,Pre-heat Oil Pipe

Features:

1. Front Panel use the LCD Touch Screen, Key and Power Switch, all digital display, can use Switch Signal( Electrical frequency signal) to control the machine start and stop, and control the power via PLC.

2. Induction Heating Machine have remote control function and adopt digital circuit control, power regulation can be adjusted from 1% to 100% resolution, and digital PID temperature control module can be configured to set the target temperature of workpiece (infrared temperature measurement automatically)

3.There are 5 working model, manual, timer, Fixed temperature, Constant temperature, section heating model.

1) Manual, On and stop in the Switch

2) Fixed Timer, setting heating time, after reach the heating time, then stop.

3) Fixed Temperature: Set the heating temperature that we need it, when the reach to the temperature that we need it, then stop the machine.

4) Constant Temperature: Adjust the heating power automatic to keep the same temperature to the workpiece.

5) Section Heating model, there are 8(S1-S8) options, each section can set the heating power, timer, temperature or constant temperature, temperature or constant temperature just can choose any one. Power as 0 means no need to heat, put theParamater that you need to set, if not choose that function then show"--

4. This machine has Memory Storage Function, There are 9 (P1-P9)programs, which can memorize 9 different workpiece in the machine, and select programs by clicking P(P1-P9). Can save much time if you have many workpiece in one machine, you can choose the programs (P1-P9) to fast working.

5. Infineon module and Inverting technologies of third generation been used; Higher reliability and lower maintenance cost.
6. 100% Duty cycle, continuous working is allowed at maximum power output.
7. Simple to install, Installation can be done by unprofessional person very easily;

8. Energy Saving Up to 20-30% compare with SCR machine.

9. Diode Rectification Technology Make sure high power factory—0.98.

10. Light weight, small Size

Paramaters:

Application
1.Pre-heat the Steel Pipe, Oil Pipe, Steel Plate

2. PWHT steel Pipe and Steel Plate

3. Heat shrink and heat expansion all shaft sleeve, motor

Advantage Air Cooled induction heating machine:

1. Infineon IGBT type,Can save 20-30% electricity compare SCR parallel type

2. Air Cooled Cooled type, no need water supply, more stable performance.

3. It is easy to work at outside due to no need water cooling.

4. Small Size and light Weight, easy to hand to work at anywhere.

5. Digital Display, easy to check the machine's working condition.

After-sale service:
1. Warranty time: Within 18 months from the date of delivering, 12months from date of receiving.
2. Within warranty all parts are free for customer, any fault caused by non-artificial reason, any quality problems such as design, manufacture, or procedure occurs, We shall provide replacement parts after detecting the faults.
3. If any big quality problems occurs out of the guarantee period, we will send maintenance
technician to provide visiting service after checking with the customer and charge for a favorable price.
5. We will provide a lifetime cost price to the buyer with the materials and spare parts used in system operation, equipment maintenance.
6. The above mentioned are only basic aftersale service requirements,we will make more promises related to quality assurance and operation guarantee.

35KW Digital Post Weld Heat Treatment Equipment

35KW Air Cooled Post Weld Heat Treatment Equipment

PWHT Machines Used Pre Heat Oil Pipe

PWHT 35KW Air Cooled Digital Post Weld Heat Treatment Equipment Used Pre Heat Oil Pipe Images